3M Respirator Mask P2 9123 1 Pack

$6.99 Sale

The 3M™ P2 Particulate Respirator 9123 is a maintenance-free, flat fold disposable respirator that is intended for use by consumers used in consumer applications (and other users where permitted by applicable regulations) to help reduce exposure to certain airborne particulate matter. The respirator is worn over the mouth and nose and attaches via elastic side bands with hook attachment behind the base of the head/top of the neck. When used as instructed, this respirator can help reduce inhalation exposure to certain types of non-oily airborne particles, such as dirt, dust, sand, vehicle exhaust particles, pollen, environmental air pollution, PM2.5 (fine particles), PM10 and other airborne particulate matter.

  • AS/NZS 1716: Meets Australian and New Zealand standards
  • Helps protect against airborne particulates when used as instructed
  • Helps reduce the number of airborne particles you breathe while enjoying everyday
  •  activities when used as instructed

 

Respirators are designed to help reduce the wearer's exposure to airborne particles.
3M Advanced Electrostatic Media filtration Technology

Highly charged microfibers enhance the capture of airborne particles while allowing for easy breathing


  • 3M advanced electrostatic filter material to capture airborne particles.
  • Easy to breathe & speak, contoured design.
  • Easy breathing with four-layer, 3D design
  • 3M proprietary filter media is designed for ease of breathing.
  • Vertical, flat folding design for easy wear and storage.
  • Packaging helps protect the respirator from contamination before use.
  • Embedded nose clip with soft foam helps to conform and shape to your nose.
  • Soft & breathable materials for added comfort.
  • Smooth inner cover web feels soft on the skin.
  • Stretchable side bands with hook help hold product tightly to face.
  • When used as instructed the tight seal allows air to go through the filter, not around the perimeter edge of the respirator.
  • 3M – A global leader in respiratory protection
  • 3M™ P2 Particulate Respirator is 159mm high (curved height) and 200mm wide.

 

Directions

1) Open the respirator, then put it on so the foam and nose clip is across the bridge of nose.Ensure it covers the nose and chin. 2) Pull each side brand behind the head and attach with hook to secure the position. 3) Press the noseclip towards your nose,then using the fingers of both hands, form the noseclip to the shape of the nose. 4) To check for a proper seal: cover the respirator with both hands then breathe in quickly. Check for air leaking at the edhes or at the nose position and if so, repeat steps 1-4 to eliminate leakage.

 

Go to full site